Aluminium Bolted Terminal, Cable to Flat, 1/0 AWG-250 kcmil Al/Cu Cable, 1/0-4/0 AWG ACSR, 2 Pad Holes, 230 kV.

Name: Aluminium Bolted Terminal, Cable to Flat, 1/0 AWG-250 kcmil Al/Cu Cable, 1/0-4/0 AWG ACSR, 2 Pad Holes, 230 kV.
Brand: Westway Electric Supply
SKU: NAR29A-2N
Price: 57.49 USD
Availability: InStock

SKU: NAR29A-2N

Product ID: 913770

Part Number:

$57.49 / ea

Enter Quantity

Note: this product is only sold in multiples of 1

Specifications
Resources

Specifications

Brand BURNDY
Certification - CSA Approved No
Certification - cULus No
Certification - ETL No
Certification - UL Recognized No
Description - Long Aluminium Bolted Terminal, Cable to Flat, 1/0 AWG-250 kcmil Al/Cu Cable, 1/0-4/0 AWG ACSR, 2 Pad Holes, 230 kV.
Description - Short Aluminium Bolted Terminal, Cable to Flat, 1/0 AWG-250 kcmil Al/Cu Cable, 1/0-4/0 AWG ACSR, 2 Pad Holes, 230 kV
Dimension - B Length inch 2.75 in
Dimension - Bolt Size fraction 1/2
Dimension - D inch 3.00 in
Dimension - L Length Overall mm 154 mm
Dimension - Length Overall inch 6.06 in
Dimension - Width inch 2.50 in
Dimension - Width mm 64 mm
FEATURES - Bullets Aluminum alloy terminal for joining a wide range of copper or aluminum cable to copper or aluminum pad;Properly proportioned to minimize conductor corrosion due to galvanic action;Pad drilling conforms to NEMA standards;1-wrench installation
Manufacturer Burndy-US, a Hubbell affiliate
Material Aluminum Alloy
Material - Hardware Aluminum
Special Features Features: Aluminum Alloy Terminal For Joining A Wide Range Of Copper Or Aluminum Cable To Copper Or Aluminum Pad, Properly Proportioned To Minimize Conductor Corrosion Due To Galvanic Action, Drilling In Pad Conforms To NEMA Standards, One-Wrench Installation, PENETROX A Joint Compound Recommended On Contact Surfaces, Available With 90 DEG Pad, Conductor Clamping Hardware: 1/2 IN, Wire Type: ACSR, Aluminum, Copper, Installation Torque: 300 IN-LB, Pad Configuration: Straight Offset
Standards - RoHS Compliance Status CM
Type NAR-A
UL Listed No

Resources

Product Brochure

Spec Sheet

Technical Drawing

Aluminium Bolted Terminal, Cable to Flat, 1/0 AWG-250 kcmil Al/Cu Cable, 1/0-4/0 AWG ACSR, 2 Pad Holes, 230 kV.

Customer Part Number

Product group

Specifications

Resources