Electronic Measuring Probes

10 COUNT REPLACEMENT PROBE TIPS, COVERS

3 contact brushes for replacement purposes

3 contact brushes, probe holder and 2 extender rods, magnetic base

39 IN (1 m) long flexible silicon insulated wire. Right-angle meter plugs. Comfort-grip over molded probes. Gold plated tips for low contact resistance. Set of 2 leads, one black, one red. Measurement Category IV, 1000V per UL-61010. Maximum current 10 amps. Lifetime Limited Warranty.

A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers. This cost-saving 3-pack is perfect for use with 3-phase tools such as the Fluke 434 or Fluke 435.

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT P

Amprobe’s new Swivel™ Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Auto and manual ranging respectively for

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

Automotive Pin And Socket Adapter Set, Color: Red And Black

Clamp-on Current Transformer, 400A, for the Fluke 1750 Three-Phase Power Quality Recorder

Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe ACDC-51NAV Navigator Clamp On Meter serves as a first line of defense for power monitoring and

Current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.

Current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Current probe is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz.